Cool Bathroom Cabinet Doors and Drawer Fronts

You don't need to tear out your entire bathroom vanity to get the look y'all desire. Just install new chiffonier doors! This simple bathroom update makes a huge difference for a fraction of the price of new cabinetry.

Our bathroom vanity was custom built to fit into this angled alcove in our basement bathroom. The cabinetry itself is pretty solid, but the doors were dated and banal. Fourth dimension for an update!

Instead of edifice my own chiffonier doors, I decided to relieve myself the time and hassle and just ordered new ones instead. It's not as expensive as you think, and it'll give your old vanity a whole new await without ripping everything out!

This post was sponsored by Cabinet Door Mart, Jeffrey Court, and Liberty Hardware, and contains chapter links for your convenience. Purchases made through these links may earn me a small committee at no additional cost to y'all.

How to Order New Cabinet Doors

After taking careful measurements of each door and drawer front end, I headed to the Cabinet Door Mart website. They have a ton of different styles of chiffonier doors to choose from. They'll even duplicate the size of the existing doors so they fit exactly!

I wanted the aforementioned Artesia door manner every bit the pantry chiffonier I built for our kitchen, merely this fourth dimension I chose the solid wood version with a birch console and alder frame. The dorsum of the bathroom's sliding barn door is birch plywood, and I wanted the grain patterns to match.

As a bonus, the beveled inset console is an exact friction match to the trim I used around the recessed bathroom shelves. I'm certain I'm the merely one who will observe this detail, merely information technology makes me happy. 🙂

All my new cabinet doors arrived carefully packaged and ready for the finishing touches.

Drill Curtained Hinge Holes

You tin order your new chiffonier doors with the swivel holes pre-bored into the back. But the quondam door hinges weren't located at the aforementioned spot at the top and the bottom, so I decided to drill them myself.

Brand sure you lot save the old vanity doors until the new ones arrive. Match the old and the new cabinet doors to cheque the size and to keep them from getting mixed up.

I showed you lot how to use a curtained swivel jig back when I built my pantry chiffonier. Hither's my video of the process:

Selecting the hinge hole distance from the edge was like shooting fish in a barrel, because I could work off of the one-time doors. I only inserted the concealed swivel jig into the hole of the old door, and adjusted the dials until information technology was snug confronting the edge.

Then I measured the altitude between the jig and the top of the door, and marked the aforementioned spot on the replacement door. This tool makes information technology piece of cake to lock downwards the dimension and transfer it to the new chiffonier doors.

Clamp the concealed hinge jig down, and then drill the hole.

Employ Stain and Superlative Glaze

I'm a total sucker for General Finishes gel stain, always since I used their grey wood stain on my dining table with amazing results! This time, I decided to attempt their Java color, which matches the sliding barn door I made for this bathroom.

But utilize the gel stain to your new cabinet doors with a foam brush, then wipe off the backlog with a rag or shop towel. Easy peasy!

Gel stain is oil-based, so let information technology dry for a few days earlier applying a elevation coat. I used Full general Finishes High Performance Top Coat. Information technology holds up well to moisture, which is important in a bathroom!

Allow the acme glaze to cure for as long as possible before installing the new cabinet doors. I'k under a tight borderline, so I only waited a couple days and handled them very carefully.

Add together New Hardware

While everything is drying, information technology'due south time to shop for new door hardware! Liberty Hardware was kind enough to provide me with their gorgeous Devereux door pulls and knobs for this projection. The bronze finish with subtle copper highlights matches the faucet I installed last week, and looks great against the wood.

I used this template to mark where to drill the holes for the pulls. If you make a error, don't worry! I have a tutorial on how to fill spiral holes in cabinet doors so you can hands fix information technology.

The knobs were centered on the drawer fronts. I had to buy shorter screws for these, since the center panel is thinner than the exterior frame.

Install Your New Cabinet Doors

Installing the new cabinet doors was pretty simple, since I used the same hinge placement equally the old doors. I left the hinges screwed into the interior of the chiffonier when I did demolition on the rest of the bathroom. All I had to do was pop the hinge cup into the hole in the door and spiral it in identify!

At that place should already be holes through the drawers from the former drawer fronts. Just mark those holes on the dorsum of your new drawer front and drill a shallow pilot hole. So spiral the new drawer front end in place.

Bath Vanity Earlier and After

What an amazing transformation! Fifty-fifty without the new tile, this would have been a major update to our bathroom. I love how the dark doors really make the limestone tile pop, and they coordinate with the mirror frame perfectly!

The vanity backsplash and wall tile all have this beautiful Emperador Mix Mosaic that brings together all the colors of my bathroom makeover. The coordinating dome trim caps off the edges and brings definition to the tiled spaces. I loooooove how it turned out!

I'm waiting until all the wall tile is installed earlier I grout, so I tin can do it all in one day.

Bank check out the residuum of the bathroom makeover!

whitakerwhisip.blogspot.com

Source: https://www.thehandymansdaughter.com/new-cabinet-doors/